Approved standards

Home > News > Approved standards

Approved standards

IRAM Certification Overview, IRAM certification, IRAM certification information - Ningbo Qiaopu Electric Co., Ltd.
Argentina IRAM Safety Mark is a mandatory (exempted products) certification mark. Argentina in resolution 92/98, adopted in 1998 (Resolution 92/98) will be established as a mandatory certification system, December 31, 2002, the regulated product must be made by Argentina Accreditation Organization (OAA) accredited certification body assessment nuclear compliance with relevant standards. Manufacturers can meet the standard of the product attached Argentina S mark, product assessment is based on the IEC standard with Argentina Argentina differences in standards or implementation. In fact, IRAM standard formulation has been adopted most of the IEC standard provisions. 92/98 resolution in several phases, from December 1, 2003 onwards, and gradually set for different types of mandatory product safety requirements. - The above information is integrated by the Office of Ningbo Qiaopu Electric Co., Ltd. [View Details]
IMQ certificate, the Italian IMQ certificate profile, the Italian IMQ Certification - Ningbo Qiaopu Electric Co., Ltd.
imq Italy IMQ quality mark stands hospital. It was founded in 1951, is an independent, non-profit organization, is responsible for electrical and gas appliances and materials, inspection and certification. IMQ now controls about 170 types of equipment classes, test new products every year more than 3,000, has certified more than 16,000 products. In Italy, IMQ support groups and organizations of the National Research Council (CNR), Ministry of the Interior, Ministry of Industry, Ministry of Public Works, Ministry of Labor, Postal Department, Transportation Department, Ministry of Foreign Trade and the Department of Defense. The IMQ executive members, except the major cities of the Power Authority, there are interested in the product certification committee, bureau, association, etc. IMQ members of this status and qualifications, good way to ensure the detection of the independence and impartiality. IMQ's business scope includes: (1) insulated cables and low voltage insulation tape; (2) low-voltage equipment; (3) lamps and accessories; (4) household appliances; (5) power meter; (6) gas appliances; (7) capacitors and filters; (8) electronic equipment; (9) medical equipment; (10) alarm system; (11) alarm system installer; (12) to upgrade components; (13) of non-electrical products; (14) Information technology; (15) instrument calibration; (16) radio interference; (17) Electronic Components; (18) ability to assess and register companies. http://www.imq.it More information from the Office of General Ningbo Qiaopu Electric Co., Ltd. [View Details]
FIMKO certification, FIMKO certification profiles, Fenlan An Certification - Ningbo Qiaopu Electric Co., Ltd.
FIMKO (Finnish Electrical Standards Association) SNDF Safety certification marks the four Nordic countries: Use: Industrial equipment,machinery and equipment, communications equipment, electrical products, personalprotective equipment and other household products. Scandinavia is Norway, Sweden, Finland, Denmark. The four countries of thecertification bodies set up an agreement between, mutual recognition of test results.In other words, if your products have any one of the four Nordic countries in a statecertification, if you need certification of the remaining three countries, you do not need to offer products for testing, you can easily obtain a certificate. Four Nordic countries were Authentication is NEMKO (Norway Electric Standards Association), SEMKO (Sweden Electric Standards Association), DEMKO (DenmarkElectric Standards Association) and FIMKO (Finland Electric Standards Association)certification. Which has a sign on behalf of NEMKO Norway certification of the product after a series of safety tests to ensure that products can withstand thephysical wear and tear, burn and electrical shock. NDMKO mark 10 years after theeffective evaluation, over the period must re-test. Sign indicating that the product hasSEMKO with European standards. The above information is integrated by the Office of Ningbo Qiaopu Electric Co., Ltd. [View Details]
DEMKO Certificate, Denmark DEMKO Certificate Profile
DEMKO Inspection of electrical equipment in Denmark is one of the country's governmental institutions, whose purpose is to protect the public, to prevent the use of specialelectrical equipment brought to life and fire hazard. The logo may not be used withoutDEMKO approval. www.demko.dk - Above the Office of the Ningbo Qiaopu Electric Co., Ltd. General [View Details]
CSA Approval,About CSA Standard-Ningbo Qiaopu Electric Co., Ltd
CSA Certification Introduction CSA Canadian Standards Association (Canadian Standards Association) in short it was founded in 1919, is Canada's first industry standard for the development of non-profit organization. In North America the market of electronic, electrical and other products are required to obtain safety certification. CSA is currently Canada's largest safety certification organization, is the world's best-known security certification bodies. It on machinery, building materials, appliances, computer equipment, office equipment, environmental protection, fire safety, medical, sports and entertainment sectors to provide all types of product safety certification. CSA has thousands of vendors around the world to provide a certification service, each year hundreds of millions of products with CSA logo in the North American market. 1992 years ago, the CSA-certified products only in the Canadian market, the product you want to enter the U.S. market, the United States must also obtain the relevant certification. CSA International is now the U.S. federal government has been recognized as nationally recognized testing laboratory. This means that Canada and the United States, according to the standard of your product testing and certification, and ensure your certification by the Federal, state, provincial and local government recognition. With CSA effective product safety certification, you want to enter the world's most tenacious and broad North American market on a breeze. CSA can help your products quickly and efficiently into the United States and Canada. CSA International will apply for the certification process by eliminating the duplication of procedures to help manufacturers save time and money. For the vendors, have to do is make an application, provide a sample and pay a fee, and the resulting safety signs but can be federal, state, provincial, and local Los Angeles from New York to the recognition at all levels. CSA International will work together with manufacturers to provide a highly secure and reliable certification program. In North America and the world, CSA people are honest and skilled to win people's trust. CSA International has four laboratories in Canada. From 1992 to 1994, they have access to "the U.S. government Department of Labor Occupational Safety and Health Administration" (OSHA) official recognition. According to OSHA rules, to gain this recognition, it can be recognized as a national testing laboratory for a range of products according to more than 360 U.S. ANSI / UL standards for testing and certification. By CSA International for product testing and certification, has been identified as fully compliant with standards, can be sold in the United States and Canada markets. Obtain certification in North America not only saving time but also save money, simply complete an application, provide a sample, pay a fee. With the CSA, it can help you step into the two markets. CSA in this convenient testing and certification services, excluding certification required to obtain two different repeat testing and evaluation.This will undoubtedly reduce the manufacturers in product certification, inspection and re-testing to track the cost, but also saves valuable time and save a variety of different manufacturers and certification bodies to deal with the trouble, so as to achieve a multiplier effect. CSA Marking is by the Canadian Standards Association Canadian Standards Association to apply log on, the unit recognized by the product's safety and authorization before they can attach CSA Marking on the product logo. CSA is a nonprofit membership sponsor, its standard-setting include: health care technology, oil and gas pipeline systems, occupational safety, electrical and solar energy. CSA head office in Canada in addition to outside, while the Atlantic region, Kui Quebec regions, the central plains and western regions, the Pacific and other branches around the world have subsidiaries and overseas representatives. CSA standards are voluntary in nature. Municipal, provincial and federal governments frequently use or reference in the management of CSA standard to replace them to develop their own standards. In this case, CSA will become a standard reference for the government specifications. Government or other organizations and associations may be required to comply with certain standards or specify a particular product must demonstrate proven to meet certain criteria. Which are based on each organization within their jurisdiction hopes to use the CSA standards and verification requirements of the job. CSA Marking of the world's most famous landmark product safety approval, even if the non-enforced in many regions of the manufacturers have to get this mark as a customer would recommend the product safety of the important basis for many buyers will even specify the requirements CSA mark has been attached to purchase the product. Recently, the Canadian importer or manufacturer is required to obtain the CSA designated purchaser signs of increasing. CSA certification purposes CSA Canadian Standards Association is the abbreviation, it is Canada's largest testing certification organization as an independent, non-governmental, non-profit organization primarily for the public, government, business and other product certification, testing and related to this standards development and information services. It is not only relevant departments under the Government of Canada's authorized certification programs in security, but also bear the quality aspects of performance testing. CSA members come from all walks of life across Canada more than 7,000 volunteers and more than 2,200 members of the community sponsor, which more than 1,000 members of the Standards Committee, the spirit of brainstorming, a reasonable comprehensive views of the people, according to some program covers a wide variety of fiction materials, products, equipment, services, facilities, standards, requirements and guidelines. CSA standards are voluntary use, but federal, provincial and local governments are often used in the formulation of regulations and reference CSA standards, these standards will become the basis for government legislation that is mandatory. CSA has six local laboratory in Canada, based in Toronto. In the Far East, Japan, Taiwan, Hong Kong set up three offices at the same time, it also with Japan JMI, the Netherlands, KEMA, BSI British established a certification agency relationship. CSA certification process 1, will complete the preliminary application form, together with all related products (including all electrical components and plastic materials), instructions and technical data be given to CSA International. 2, CSA International will be determined according to the specific circumstances of product certification costs, and then notify the applicant by fax company. 3, confirmed by the applicant company will send a formal notice of the application form and the notice includes the following requirements: (1) after the signing of a formal application form, wire transfer certification costs (which can be paid in RMB) to the office. (2) by notice to the test sample to the designated locations. 4, designated laboratories will carry out certification work on time. 5, certification testing is completed, applicants will be issued a preliminary report (Findings Letter), setting out in detail as follows: (1) how to improve the product mix to meet the required standards. (2) to be used to complete the certification report and other information. (3) Please review the certified record of the applicant company (Certification Record) content of the draft (4) CSA certification marks and to obtain the required marks method. (5) products for the factory test (Factory Tests). 6, CSA International will apply the company's answer to the above fifth to be assessed. 7, and CSA International will prepare a report for reference and track the inspection and product certification report with the (Certification Report). 8, at this stage, in some cases, CSA International to the factory for the factory to the initial assessment (Initial Factory Evaluation), referred to as the IFE. 9, the last will, together with CSA International certification records (Certification Record) a copy of the certificate (Certification of Compliance) applications for authorization in its products with the CSA certification mark. 10, and CSA International applicants to sign a service agreement (Service Agreement), to represent the two sides agreed to CSA International for product to the factory test track. Applicants each year pay an annual fee (Annual Fee) to maintain the agreement. CSA certified product range CSA certification test focused on eight areas: 1, the survival of mankind and the environment. Including occupational health and safety, public safety, sports and entertainment equipment environmental protection and health care technology. 2, electrical and electronic. Installation of electrical equipment, including building regulations, various industrial and commercial and residential electrical and electronic products. 3, communication and information. Including residence processing systems, telecommunications technology and equipment and electromagnetic interference. 4, the building structure. Including building materials and products, civil engineering products, concrete, masonry, pipe fittings and architectural design. 5, energy. Including renewable energy and transfer, fuel combustion and safety equipment, nuclear technology. 6, transport and distribution systems. Including motor vehicle security, oil and gas pipelines, processing and distribution of goods and offshore facilities. 7, material technology. Including welding and metallurgy. 8, business and production management systems. Including quality management and foundation engineering. CSA Certified ways and means CSA certification program very flexible, depending on the product, the method steps are not the same. 1, according to the standard models. Such as the specifications are made for each certification, expensive and time-consuming, so for the same purpose, a variety of different specifications, optional one two representative to do authentication. Such as the 1-100 kW motor, can do so. 2, according to the special requirements of a product to do authentication. Such as: industrial switch, according to the views of users, manufacturers of products with the original design of the products are different, users can request to do authentication. 3, for large-scale equipment certification. Such as large equipment is manufactured in several enterprises, can be assembled together in the assembly locations for certification. 4, according to the person's mental, physical field trials. Drugs such as children can not open the package cover. CSA commonly used authentication method in four steps: 1, the certification before the analysis. Application by the applicant, provided by the applicant to analyze the adequacy of product information, sample compliance. 2, pre-test analysis. Teacher certification test to determine the project, to be a test program. 3, according to the procedures and test the project. 4, lab-test analysis. Certified engineers will test the results of analysis, to meet with the applicant. If test results consistent with the requirements, certification that come to an end, the certificate can be issued to the applicant certification. - Above the Ningbo Qiaopu Electric Co., Ltd. General Office of the [View Details]
CEBEC Approval, Standard in Belgium - Ningbo Qiaopu Electric Co., Ltd.
Belgium CEB IBN certification CEBEC certification The above information is provided by the Ningbo Qiaopu Electric Co., Ltd. [View Details]
CE Approved,About CE marking-Ningbo Qiaopu Electric Co., Ltd.
European origin CE is the abbreviation of French and English meaning "European Conformity, the European Community, in fact, CE or European languages in many countries of the" EC "is the abbreviation of the phrase, the original phrase in English EUROPEAN COMMUNITY abbreviated as EC, Later, because the EC is in the French COMMUNATE EUROPEIA, Italian for the COMUNITA EUROPEA, Portuguese is COMUNIDADE EUROPEIA, Spanish COMUNIDADE EUROPE, etc., so change the EC for the CE. of course, may also wish to CE as CONFORMITY WITH EUROPEAN (DEMAND) (in line with European (requirements)), constitute the core of the European directive "major requirements" in the EC May 7, 1985 of (85/C136/01) No. "technical coordination and standards for new methods of resolution" on need for the development and implementation of the directive purpose 'main demands, "has a specific meaning, that is only limited to the products do not endanger humans, animals, and for safety aspects of the basic safety requirements, rather than the general quality requirements, coordination of the main requirements of Directive only provides general instructions to the standard task of the products comply with the relevant directive of the main requirements, you can attach the CE mark, rather than by the quality of the standard provisions of the general determination whether the use of the CE mark, so the exact meaning is: CE mark is a mark of safety approval rather than the quality mark. in the 1940s, Western European countries feel that in the Soviet Union between the two countries to ensure their own safety, improve its international status, to speed up economic development, we must unite, so pushing the process of European integration European integration technology can be divided into five levels: the establishment of a free trade area, customs union, unified market, the Economic and Monetary Union and Political Union. European Single Market In 1985, former French Finance Minister Jacques Delors as Commission President begun. In June 2002, in Milan summit, the European Commission formally proposed to be established within the Community "without borders" of a unified market, the real implementation of people, goods, capital, services, free circulation. In 1986 the European Community signed the "European single file," plans to create a single market, the same year Spain and Portugal join the EC. January 1, 1993, the European Common Market was put into operation. CE certification significance First, the need for CE certification CE certification for all countries to trade products in the European market provides a unified technical specifications to simplify trade procedures. Product of any country to enter the European Union, European Free Trade Area must be CE certification, CE mark affixed on the product. CE certification is therefore the product into the European Union and European Free Trade Area countries, the market permits. CE certification that the product has reached the required safety requirements of EU directives; enterprise and a commitment to consumers, increasing consumer trust in the product; CE marked products will be sold in the European market to reduce the risk. These risks include: ● detained by Customs and the investigation of the risks; ● investigation of the market risk oversight bodies; ● been peer risk charges for competitive purposes. Second, the benefits of certification for CE ● EU laws, regulations and harmonization of standards is not only quantity, but the content is very complex, designated agencies to help achieve the European Union is a not only saving time, effort, and reduces the risk of the wise; ● designated by the EU institutions to obtain the CE certificate, you can maximize access to consumer and market surveillance authorities of the trust; ● effective in preventing irresponsible accusations from happening; ● in the face of litigation, the EU CE certificate by designated agencies, will become legally binding technical evidence; ● Once the punishment has been the EU countries, certification bodies will be shared with business risk, thus reducing the risk of the enterprise. Third, the procedures for CE certification ● an application by the enterprise; ● certification contract signed by both parties; ● enterprises to provide test samples and technical documentation; ● technical documentation for sample testing and evaluation; ● Certificate of Compliance issued: ● Declaration of conformity issued by companies; ● attached by the company in the CE marking on products. CE Mark Free movement of goods is the cornerstone of creating a single market, to achieve free movement of goods mechanism is the CE mark, this mechanism is established between the EU countries to avoid creating new barriers to trade, mutual recognition and coordination on technical standards. The principles are as follows: - Harmonization of the legal documents (ie the EU Directive) provides the contents of the product is limited to the basic requirements for the product in order to facilitate free movement within the EU; - EU Harmonized Standards contain the basic requirements; - EU harmonized standards and other applicable standards is voluntary, the product can choose to apply the EU harmonized standard, you can also apply other technical specifications to meet the Directive's basic requirements; - Products meet EU harmonized standard course to confirm the instruction to meet the basic requirements. In order to make instruction in the basic requirements under the product more operational, a series of EU harmonization of standards drawn up, by the Member States responsible for harmonization with national standards. Harmonization of standards and compliance with the spirit of the discussion of mechanisms and instructions to modify the standard mechanism also will be established. As the requirements of the Directive in all countries must comply with the mandatory requirements, these requirements should be recognized to prevent safety hazards or other hazards of the minimum program, different from the ordinary commercial trade in the technical requirements, and the objective requirements for standardization . To make the single market principles to be implemented in practice, the EU further provides that the product meets the basic requirements of the Directive provides a reliable assessment methods that people commonly known as the CE certification: - The introduction of the concept of modular product evaluation, product evaluation by the evaluation program modules, assessment procedures are assessed in accordance with qualified products use the CE mark; - Introduction of a unified European harmonized standard, quality management system standard (EN ISO 9000 series) and quality assurance standards for rating agencies (EN45000 series); - The EU level, between the member states recognized rating agencies assess the agency system and the comparison between the mechanisms; - In the original country their own array of product testing and certification mechanism for the establishment of mutual recognition; - Simplify the member states, the quality of the field of systems between the industry structure (such as: measurement and calibration systems, testing laboratories, certification and testing organization, recognized organizations) differences; - The use of mutual recognition agreements, cooperation and other technical assistance projects to promote among member countries, member countries and between countries outside the EU in international trade. CE mark is intended to provide practice in a practical and flexible way to conformity assessment of products to meet the modern trend of global economic integration, the diversity of industrial production. To meet product development, production, circulation at all stages (such as: design, proofing, production), product evaluation module is divided into technical documentation, the type testing, quality assurance, as well as in practice by the producer or the third party to complete the assessment. Products in the market and put into service before they must meet all applicable essential requirements of EU directives, select the appropriate product evaluation procedures for product evaluation after passing the mark CE mark. All products are marked CE mark that has met all EU directives, Member States must take positive measures to ensure free flow in the single market, unless there is clear evidence that the product does not meet the applicable instructions in the basic requirements, or This product has not yet been provided for by existing instructions of a significant risk. Size regulations CE mark European market since 1990 after the implementation of toy products CE mark, already on the strict implementation of the current trend, but the domestic toy manufacturers in the product or when the CE mark printed on the packaging, not fully in accordance with relevant provisions of the size of production, this will This will be called on domestic manufacturers that the CE mark on toys, trade names, trademarks, imports into the European market and the agent's address must be clear, readable style, pasted or printed on the packaging of toys or other body, if Toy size is too small, or small parts consisting of toy department, the information can be printed on the toy packaging or catalog, the European CE mark for the size of the market, packaged by which the height of the word at least CE 5mm, and CE shall not exceed the total character length of 12mm, CE font width of not less than one fifth. Thickness of at least height of 1 / 5 (This at least 20 × 1 / 5 = 4mm) Figure outer radius of 10mm Around the horizontal column within the outer radius of at least 80% (10 × 0.8 = 8mm) The picture shows the height of 2 cm of the CE marking example, labeling of the content should include The text printed in the local market, warnings and precautions. Manufacturers or authorized agents, import business names, trademarks and addresses. Meet the requirements of the CE. CE Mark applicable to directives As of December 1997, the EC issued the instruction following the implementation of the CE mark, now applies to products, instruction number, release date, a list of implementation dates, respectively: Directive Title CE Ref Entry into force Command Name Code mandatory start date and the date Electromagnetic Compatibility Electromagnetic Compatibility Directive 2004/108/EEC 1.1.1992 1.1.1996 Low Voltage Electrical Products Low Voltage Directive 2006/95/EEC 1.1.1995 1.1.1997 Toys Toys Directive 88/378/EEC 1.1.1990 Simple Pressure-vessels Simple Pressure Vessels Directive 87/404/EEC 1.7.1992 Construction Products Construction products 89/106/EEC 27.6.1991 Machines Machinery Directive 2006/42/EEC 1.1.1993 1.1.1995 Personal Protective Equipment Personal Protective Equipment Directive 89/686/EEC 1.7.1995 Non-automatic Weighing Machines Non-automatic Weighing Instruments Directive 90/384/EEC 1.1.1993 Active Implantable Medical Devices Portable Medical Devices Directive 90/385/EEC 1.1.1993 1.1.1995 Medical Devices-general General Medical Devices Directive 93/42/EEC 1.1.1995 15.6.1998/4/3 Gas Appliances Gas appliances directive 90/396/EEC 1.1.1992 1.1.1996 Telecommunications Terminal Equipment Telecommunications Terminal Equipment Directive 99/5/EEC 6.11.1992 Boilers Boilers Directive 92/42/EEC 1.1.1994 1.1.1998 Explosives Blasting Equipment Directive 93/15/EEC 1.1.1995 1.1.2003 Satellite Earth Station for Telecommunications Directive 93/97/EEC 1.5.1995 1.5.1997 communications satellite ground station Lifts Lifting equipment 95/16/EC 1.1.1998 1.1.2000 Equipment for Use in Explosive Atmospheres Equipment for explosive gas Directive 94/9/EC 1.3.1996 1.7.2003 Recreational Craft (Boats) Recreational Craft Directive 94/25/EC 16.6.1996 16.6.1998 Non-simple Pressure Vessels Non-simple pressure vessels 97/23/EC 1.7.1996 1.1.1999 CE certification process This process applies to companies looking for third-party laboratory for CE certification process: 1 manufacturer related laboratory (hereinafter referred to as laboratory) made a preliminary oral or written application. (2) the applicant fill out the CE-marking application, the application form, product manuals and technical documents should be sent to the laboratory (if necessary, require the applicant to provide a prototype). 3 laboratory tests to determine the standards and test items and price. 4 applicants to verify pricing, and relevant technical documents and samples sent to laboratories. 5. The applicant to provide technical documentation. 6 lab fee notice issued to the applicant, the applicant informed the charges required to pay certification costs. 7 laboratory for product testing and review of technical documents. 8 technical documents reviewed include: a file is complete. b file according to EC official languages (English, German or French) to write. 9 If the technical documentation has not been provided or use the language laboratory will notify the applicant to improve. 10 If the test failed, the laboratory will notify the applicant, to allow the applicant to improve the product. So until the test pass. Applicants should apply in the original technical information to make changes to reflect the actual situation after the change. 11 page section 9,10 of the costs involved in rectification, the laboratory will notify the applicant to issue additional charges. 12. Notify the applicant required to pay fees under the Supplemental rectification costs. 13 laboratory test reports provided to the applicant or technical documents (TCF), and CE Compliance (COC), and the CE mark. 14 CE to ensure that self declaration signed by the applicant and attached to the CE Marking on the product. CE certified model CE certification can be said that the world's most advanced product conformity assessment model, which first introduced the concept of modules, one for the CE Marking of the assessment by the evaluation module and the modules from these assessments form the evaluation process. In general, the evaluation module are the following: A: self-proclaimed (declared by the producers themselves, and provide key technical information products) B: Type testing (by the European Notified Body for product fully tested) C: Notified Body for the production of factory inspection D: Notified Body for the production and quality management system of factory inspection E: Notified Body for the quality management system for traders and other intermediaries to review F: Notified Body for EU imports of bulk product review landing G: Notified Body for the EU's imports have not been type tested products include a comprehensive review of the test pattern Different instructions for what modules should do the required assessment process. Such as: Low Voltage Directive (LVD), Electromagnetic Compatibility Directive (EMC) can be formed by the A; Gas Appliance Directive (GAD) by the BC, BD, BE or BF composition. Do the following detailed explanation: First, the plant self-control and certification of Module A (internal production control) 1, for simple, high-volume, non-hazardous products, only to apply European standards for manufacturers. 2, the factory for qualified self-assessment, self-declaration. 3, technical documents submitted to state institutions than ten years, on this basis, can review and inspection to determine whether the product complies with Directive, producers and even to provide product design, production and assembly process for inspection. 4, no statement of its production process to ensure that products consistently meet the requirements. Module Ab 1, the factory fails to European standards. 2, the testing agency's special parts for the random product testing. Second, the assessment by the testing agency Module B (EC type assessment) Plant samples and technical documents to send to the selected testing agency for its review, the test certificate issued by the agency. Note: Only CE-B is insufficient to constitute use. Module C (with type [sample] line) + B Factory for Declaration of Conformity (consistent with the certified type), the statement than ten years. Module D (production process quality control) + B: This model concern the production process and final product control, factory testing agency in accordance with the approved methods (quality system, EN29003) for production, on the basis of this statement in its product line with the Certification Type (Declaration of Conformity). Module E (product quality control) + B This model is concerned only with the final product control (EN29003), the other with Module D. Module F (product testing) + B Factory to ensure that its production process to ensure products meet the requirements for declaration of conformity. Recognized testing organization through the entire inspection or spot checks to verify the conformity of the product. Testing issues certificates. ModuleG (one by one test) Factory statement complies with Directive requirements, submit to the testing agency technical parameters of products, product testing agency to inspect the certificates. Module H (comprehensive quality control) of the model concern the design, production process and final product control (EN29001). Rest with Module D + Module E. Among them, the model F + B, G model risk is particularly high for the product. CE certification scope Of January 2007 a total of 27 members, they are: France, Germany, Italy, the Netherlands, Belgium, Luxembourg, Britain, Denmark, Ireland, Greece, Portugal, Spain, Austria, Sweden, Finland, Malta, Cyprus, Poland, Hungary, Czech Republic, Slovakia, Slovenia, Estonia, Latvia, Lithuania, Romania, Bulgaria. CE does not meet the cost - Products can not legally supply the EU market; - Put on the market before the product can not be recovered; - May result in product seizure and (or) fine. CE mark is available for advertising purposes CE marking is the official marketing product safety control design, not production for the consumer, nor is it marketing tool and therefore not suitable for advertising. However, in the production of your product catalog, printed in the directory do not forget to legally obtain the CE mark. Products into the European market, only to do CE certification enough? We know, CE certification does not involve factory inspection, that certification does not establish a tracking service to the plant, which will cause two problems: 1 When the relevant European standards are revised and updated, the plant still in production by the old standards; 2 factory can not maintain the daily production of the product certification standards. Therefore, in many cases, the products into Europe will be asked to do the importing country's product certification. Here are some of the more influential, but also our regular contact with European certification body. SGS: SGS Societe Generale de Surveillance SA is short, translated as "SGS." It was founded in 1887, is the world's largest and oldest non-governmental third parties to engage in product quality control and technical appraisal of the multinational corporations. Headquartered in Geneva, in the world with 251 branches, 256 specialized laboratories and more than 40,000 professional and technical personnel in 142 countries product quality inspection, monitoring and assurance activities. Domestic standards in 1991 and China Development Corporation (General Administration of Quality Supervision subordinate units) set up a joint venture company, SGS-CSTC Standards Technical Services Co., Ltd., in China set up 24 branch offices nationwide and employs more than 5,000 people, mainly engaged in testing, testing, certification, and examination of plant protection and other trade-related work. VDE: (VDE Testing and Certification Institute) is a German certification body, it has more than 450 employees in Germany, more than 1,800 times a year to complete the test, there are nearly 200,000 kinds of products the name of VDE mark (Figure 8). VDE and the State Commodity Inspection Bureau and the China Commodity Inspection Corporation has maintained a good relationship. KEMA: Headquartered in the Netherlands KEMA Quality Assurance - KEMA REGISTERED QUALITY is a company with more than 70 years of international testing and certification bodies, it's more than 1,500 employees scattered around the world. KEMA cooperation with the CCIB and CCIC an early start. KEMA mark figure IX. Founded in 1997, Hangzhou, March coordinating center KEMA, KEMA is the six centers, mainly in Zhejiang Province KEMA certification services, certification and annual inspection before the test. IMQ: (ITALIAN QUALITY MARK INSTITUTE) is an Italian certification body, and with CCIB CCIC has a good working relationship. IMQ mark figure X. LCIE: (LABORATIRE CENTRAL DES INDUSTRIES ELECTRIQUES) is a French, a certification authority, the certification mark is NF, figure XI. TUV: a German, "Technical Monitoring Association," the abbreviation in Germany is a special legal institution, authorized and commissioned by the Government, for industrial equipment and technology in product safety certification and quality assurance system and environmental system assessment audit. Which, TUV-PS collaboration with CCIC China Corporation, established in the country eight test centers, Hangzhou is one of them. TUV-PS test center is mainly engaged in Hangzhou, Zhejiang Province before the certification test and annual inspection, and the corresponding certification. TUV Rheinland (TUV RHEINLAND) is with the CQC (China Import and Export Commodity Quality Certification Center), to undertake follow-CQC inspection services in Europe. TÜV Rheinland (Shanghai) Co., Ltd. and Zhejiang CCIC-cooperation, set up a liaison office TUV Rheinland of Zhejiang, Zhejiang Province on behalf of the Rhine to carry out product certification services. LGA: LANDESGESTERBEANSTAST BAGERN, is more famous in Germany, a certification authority. Others, such as DEMKO, NEMKO, SEMKO, BSI, etc. are also very well-known European institutions (organizations). CE certificate for the current common are the following: Declaration of conformity / Declaration of compliance "Declaration of Conformity" This certificate is self-declaration, should not be issued by the agency, so you can use the format of EU companies, "Declaration of Conformity "instead. Certificate of conformity / Certificate of compliance "Compliance Certificate" This is the agency issued a certificate of compliance, must be accompanied by test reports and other technical information TCF, while enterprises should also sign the "Declaration of Conformity" EC Attestation of conformity "EU Standard Certificate of Conformity "This is the European Union issued a certificate designated agency, in accordance with EU regulations, only the designated agencies in order to be eligible for EU issued the certificate, even if some well-known in Japan and the United States can not be directly awarded certification bodies such certificate. - Above the Ningbo Qiaopu Electric Co., Ltd. General Office of the [View Details]
UK BSI certification, BSI60320 standards, BSI60320 Profile
UK BSI certification, BSI60320 standards, BSI60320 Profile BSI CB IECEE system covering the product is recognized by the system within the scope of the IEC standard products. When three or more member states announced that they want to join and support a standard CB system, the new CB Scheme IEC standard will be used. Current IEC standards published in the IECEE CB Bulletin and on the website. Current electromagnetic compatibility (EMC) are not included in the CB Scheme, unless the special requirements of IEC standards used. However, CB system has begun to survey its members test their security together with the EMC measurement of the will. The research results will be published in the Gazette on this subject on the CB. The type of certification 1. "Kite" mark or BS certification mark certification "Kite" mark is a registered trademark of BSI-specific, domestic and foreign manufacturers can apply for use. Use of this logo business is not only its products must meet the relevant BS standards, and must comply with BS-5790 has a quality assurance system (ISO9000 family of standards for quality assurance model can be), the certification process, but also the system to be assessed. 2. Safety Mark Certification The use of safety signs products must meet the safety requirements of BS standards or other safety requirements. Application and accreditation schemes and the "kite" mark means much the same, equally well in domestic and foreign enterprises. There are currently more than 20 countries and regions, about 130 kinds of products using these two signs. They are Germany, France, Belgium, Spain, Italy, Austria, Switzerland, Sweden, Denmark, Norway, New Zealand, Japan, Australia, Canada, Ireland, Northern Ireland, Rhodesia, South Africa, Liechtenstein, and Hong Kong. 3. Corporate quality assurance capability certification (assessment and registration of plant) Such a system is in accordance with BS-5790 (or of ISO9000) quality assurance system of the enterprise evaluation, but does not require the product must be BS standard. As of 1991, to assess BSI registered company is about 12,000. 4. BS9000/CECC and IECQ certification This certification is designed for electronic components for quality assessment. BS9000 for domestic, CECC apply to most countries in Western Europe, and IECQ is applicable to international, aimed at improving the quality and reliability of electronic components, electronic equipment to ensure quality. 5. Storage capacity assessment and registration This assessment system is the wholesaler's warehouse and inventory management methods to evaluate quality. To obtain this mark product, indicating the manufacture, storage, packaging, handling all reached a high level. UK certification bodies to improve the authority and reliability of the product logo, BSI for the following three measures; 5-1. Laboratory Accreditation System (NATLAS) In 1981 the Ministry of Trade and Industry, the British government enacted the "National Voluntary Laboratory Certification Program (NATLAS)." Headquartered in the National Institute of Physics (NPL), on behalf of the Ministry of Trade and Industry to exercise the functions of the laboratory accreditation. NATLAS has three committees, one is the most senior committee, responsible for laboratory accreditation guidelines and policies. The documents have been developed, "the British NATLAS management approach," "British NATLAS laboratory certification standards" and "British NATLAS assessor standards. A total of two second-level committee, are responsible for test and measurement verification. Ten third-level Committee was set up by product category. NATLAS Plan is the main target small and medium sized laboratories, since these laboratories are not high profile, need to be supported by recognized authorities in order to contract more testing business. A laboratory approved about a year and a half, the average cost will be around 1000 pounds. 5-2. Registration system for quality assurance reviewers This is supported by the UK Department of Trade and Industry, the Institute of Quality Assurance (IQA) is responsible for implementing the system. System provides all the assessors engaged in quality assurance and assessment must be registered. Valuation of assessors qualified to adopt a points system. Reviewers generally should be at least 8 points (qualifications of at least 1 minute, practical experience of at least 5 points); assessment team leader should be at least 10 points (qualifications at least 2 points, experience at least 8 points), and in the last three years, at least five times the work involved in assessment, one of which should receive the appointment of the year. 5-3. Recognized certification body system (NACCB) For certification standardization, quality assurance certification bodies, and it has legal status, the British established a system of certification bodies accredited (NACCB), the system provides only with certain conditions and after registration to accredited certification bodies are allowed to engage in certification. BSI Quality Certification program, application procedures and business use and management of the certification mark should be consistent with "BSI certification mark use regulations." In addition to the quality of the UK BSI certification, there are the British Lloyd's Register LR quality certification, its international reputation is not lower than the BSI certification, but limit the scope of certification of the shipbuilding industry and atomic power plants, chemical plants, locks, bridges, container, steel products, hydraulic, testing machine. Lloyd's Register LR and management of quality certification schemes and BSI certification program is basically the same, and in many countries, agencies, business applications more convenient. www.bsi.org.uk More information from the Office of General Ningbo Qiaopu Electric Co., Ltd. [View Details]
ASTA certification, the United Kingdom ASTA certification, the British Safety Certification
ASTA certification, the United Kingdom ASTA certification, the British Safety Certification ASTA BEAB mark: the UK Audit Bureau of household appliances and electrical equipment has been designated three qualified certification body, awarded the safety and quality certification marks. BEAB (British Electrotechnical Approvals Board) British Electrotechnical Certification Authority, established in 1960, is an independent national security accreditation authority, and controllers for household appliances to provide secure authentication and other services. After four years of operation for many years, BEAB in Europe and around the world enjoy a high reputation. ASTA (The Association of Short-circuit Testing Authorities) was founded in 1938, for switchgear and components to provide secure authentication and other products and services. ASTA (The Association of Short-circuit Testing Authorities) was founded in 1938, for switchgear and components to provide secure authentication and other products and services. January 1, 2004, BEAB ASTA merged with the ASTA BEAB Certification Services., To become the UK's largest testing organization. January 1, 2004, BEAB ASTA merged with the ASTA BEAB Certification Services., To become the UK's largest testing organization. In Europe, Sanyo, GE, Electrolux, Glen Dimplex, Sharp, Whirlpool, Panasonic and other major world-renowned enterprises in the market place, both have to apply BEAB safety mark to show the safety of their products. In China, there are already many companies to make their products more credible in the UK market, more competitive, easy to enter the international market the product successfully applied BEAB safety mark. Above by the General Office of the Ningbo Qiaopu Electric Co., Ltd. [View Details]
CCC Approvld, China CCC Standard
About CCC Approvld CCC certification is the "China Compulsory Certification", the English name "China Compulsory Certification", abbreviated as CCC. CCC certification mark of "CCC", the State Certification and Accreditation Administration Committee in accordance with "Regulations for Compulsory Product Certification" (Republic of China General Administration of Quality Supervision, Inspection and Quarantine Order No. 5) developed. CCC main content CCC certification of products related to the implementation of the national compulsory safety certification. To sum up the main contents of the following areas: (A) in accordance with WTO agreements and international rules, national law concerning human health and safety, animal and plant life and health, and environmental protection and public safety products to implement uniform, mandatory product certification system. Certification and Accreditation Administration of the unified national compulsory product certification system is responsible for the management and organization of implementation. (B) the national compulsory product certification system, the main feature, the state announced a unified directory, to determine the uniform application of national standards, technical regulations and implementation procedures, development of a unified logo identity, to establish uniform fees. Where the inclusion of mandatory product certification directory of products must be approved by the certification bodies designated by the State qualified to obtain the relevant certificate and certification mark, before entering, importing, sales and service establishments in the business use. (C) According to China's WTO commitments and reflects the principle of national treatment, first published in "the first mandatory product certification catalog" is the original product covered by the import licensing system and mandatory safety and quality certification and EMC safety certified products based on doing the right amount of increase or decrease. Products covered by the two systems had 138 species, the release of "directory" to delete the original inclusion of compulsory certification management and treatment of medical ultrasound equipment and other 16 kinds of products, increasing the safety glass used in construction and other 10 kinds of products actually included in the "directory" of mandatory product certification 132 species. Second, they issued a "compulsory product certification decoration products catalog" (including solvent-based coatings, ceramic tile, concrete, antifreeze), "mandatory product certification of Security Technology Products" (including intrusion detectors burglar alarm control, vehicle anti-theft alarm system, security safes, security safes) (D) the state compulsory product certification using a unified "CCC" mark. After the implementation of China Compulsory Certification mark, will gradually replace the original implementation of the "Great Wall" logo and "CCIB" mark. (E) national unity to determine the fees and mandatory product certification standards. New fees and development charges, according to non-profit purposes and reflect the principle of national treatment, considering the current fees and certification fees with reference to overseas and similar charges. (F) new compulsory product certification system in the May 1, 2002 into effect, the certification body officially start accepting applications. To ensure that the old and new smooth transition, the original product safety certification system and import safety and quality licensing system since August 1, 2003 onwards abolished. CCC application procedures Basic situation: · CCC certification for splitting a written application and apply online. * Application with the applicant, manufacturers, factories and product information. * Each model unit of goods should be a separate application. * The same type of goods of different manufacturers should be a separate application. Phase 1: receipt of application processing to meet the requirements of the application, certification issued to the applicant receiving notification that the applicant sent or send the documents and information. * Meanwhile, the certification body to send the fees and notification. * The applicant will be required to provide information to the certification body. * The applicant after payment, fill out the required proof of payment. [Note: The companies generally provide the following information: assembly diagrams, electrical schematics, circuit diagram; critical components and / or materials; the same application unit differences between the various models described; other required documents; CB certificates and reports (if any)]. Phase 2: Data review of the data review stage, Product Certification Engineer required for the application unit. * Unit, if the need for sample testing, product certification engineers like to send notifications sent to the applicant and the corresponding payment notice, and notify the applicant to the appropriate testing agency to send the sample to receive notification. Stage 3: Sample received samples by the applicant directly to the designated testing organization. * The applicant after payment, fill out the requested proof of payment. * Testing agencies to collect samples for inspection, fill out the sample inspection reports, samples will be issued for failure to inform the sample rectification, rectification and fill the sample inspection reports. • sample inspection, the inspection agency progress in completing the sample test in statement certification. * Certification test samples received after the progress in identifying the applicant, after related expenses paid, to issue a formal acceptance notice to the applicant to the testing organization issued a test mission statement, sample test started. Stage 4: sample testing companies in the pilot phase should be the type of work: to send test samples, parts and technical information needed to understand the trials progress, if there is failure to follow the sample test items for timely rectification rectification notice. * After the end of the test samples, testing organizations fill out the sample test results notice. * Testing organizations test reports and other information will be sent to the certification body. Phase 5: Factory Inspection * The need for application of factory inspection, testing institutions and organizations for factory inspection. * Factory inspection preparation, including: factory inspection and certification agencies have agreed on the dates and personnel; in accordance with the requirements of the factory are ready to check documents and records; inspection arrangements in the factory production line running. * Enterprises should strictly follow the requirements of the factory inspection work with the factory inspection teams. According to confirmed non-conformities and the factory inspection, to complete the rectification of non-conformity. Stage 6: conformity assessment of the various stages of product certification engineers collected the results after the initial evaluation. * The results of conformity assessment personnel for re-evaluation of the above. Stage 7: Director of the certificate to receive certification authority certificates. * Licensing of the applicant print slip, self-created or certification requirements to send a certificate. Follow-up inspection if the products are inconsistent with the type of test samples, certification bodies should be confirmed before production. • To supervise and certification agencies have agreed on the normal date. • In supervision, the production line should be normal production, and certification of products in the factory or can provide a certain amount of product available for sampling (such as: outside the warehouse, market, etc.). * Ready to supervise the required documentation and records. • Confirm findings do not meet the entry and supervision. * To complete the rectification of non-conformity. Content from Ningbo Qiaopu Electric Co., Ltd. General Office of the [View Details]

Page 2 Of 2 First Previous 1 2

News